Multibody Based Parameter Estimation of Stewart Platform Using Particles Swarm Optimization

Abstract

Parameter estimation plays an important role in improving the accuracy, control, and diagnostic performance of mechanisms, particularly in parallel mechanisms such as the Stewart platform, which are increasingly used in high-precision automation, advanced manufacturing, and machine-centric applications. This paper presents a multibody–based framework for generalized dynamic modeling and inertial parameter estimation of parallel robotic manipulators, demonstrated on the DeltaLab-SMT EX800 Stewart platform. A systematic constrained multibody dynamic formulation is developed using an iterative kinematic–dynamic coupling scheme to compute generalized coordinates and their time derivatives under prescribed motion trajectories. The proposed identification manifold is experimentally validated on the physical test rig, in which the platform motion is executed via the control/DAQ system, while inertial measurements are acquired using an external 6-axis motion sensor to obtain direct acceleration data from the moving platform. Platform acceleration measurements are mapped through the inverse dynamics of the multibody model to derive the corresponding generalized forces, providing a practical and cost-effective alternative to direct force measurement with transducers. A Kalman filter is subsequently employed to combine the measured and the model-predicted data, yielding optimally filtered estimates of the inertial coordinates for accurate parameter identification. Inertial parameters are estimated using particle swarm optimization and bench marked against a gradient-based Levenberg–Marquardt approach, with comparison in terms of convergence behavior, robustness, and estimation accuracy. The results support the proposed framework as a measurement-informed benchmark methodology for parameter estimation of parallel manipulators.