Surface Modification and Corrosion Performance of Laser Cladded Co–Ni on Ti–6Al–4 V in 0.5 M H2SO4 Environment

Abstract

Abstract This study investigates the laser cladding of Co and Ni powders onto Ti–6Al–4 V substrates, varying the admixed percentages while adjusting laser processing parameters. The influence of nickel and cobalt contents on the microstructure, phase composition, and electrochemical behavior of the laser-clad Ti–6Al–4 V coatings were analyzed. Coating morphology and phases were characterized using scanning electron microscopy (SEM) equipped with energy dispersive spectrometry (EDS), and X-ray diffractometry (XRD), respectively. The corrosion resistance of Ti–6Al–4 V, both with and without Ni–Co additions, in 0.5 M H 2 SO 4 was evaluated using potentiodynamic polarization technique. Results indicated that the coatings exhibited excellent metallurgical compatibility with the substrate. Additionally, the high scan speed laser-clad samples showed enhanced corrosion resistance compared to those processed at low speeds. The potentiodynamic polarization analysis revealed passive behavior in all specimens, with higher cobalt content notably enhancing passivity and corrosion resistance by suppressing the anodic reaction.