article · International Journal of Applied Research in Mechanical Engineering
This paper presents a hybrid optimization approach for the determination of the optimal process parameters which maximize the material removal rate and minimize surface roughness & the tool wear rate. The input parameters of electrical discharge machining considered for this analysis are pulse current (Ip), pulse duration (Ton) & pulse off time (Toff). The influences of these parameters have been optimized by multi response analysis. The designed experimental results are used in the gray relational analysis & the weight of the quality characteristics are determined by the entropy measurement method. The effects of the parameters on the responses were evaluated by response surface methodology, which is based on optimization results. On the basis of optimization results it has been found that pulse current (Ip) of 5A, a pulse duration (Ton) of 60μs & pulse off time (Toff) 45μs, which are the best combination of this analysis.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.47893/ijarme.2013.1111
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
