article · Journal of the Egyptian Society of Tribology /Journal of the Egyptian Society of Tribology
In the present work, a 6 mm thickness SAF 2507-SDSS were welded by multi-pass gas tungsten arc welding (GTAW) process with ER2594 electrode using different heat inputs. Microstructure and mechanical properties of SAF 2507 joints obtained from multi-pass GTAW processes were investigated. The obtained joint was evaluated and characterized by using visual inspection, radiographic test, liquid penetrant test, optical microscopy, scanning electron microscopy, tensile and hardness test. The results obtained have shown that the type of filler electrode, heat input, and interpass temperature are the controlling factors in achieving a sound weld joint. The multi-pass GTAW of 2507 SDSS exhibited an enhancement in both hardness and yield strength compared to the base metal. In the welded zone, there were three distinct forms of austenite: Widmanstatten austenite (WA), intra-granular austenite (IGA), and grain boundary austenite (GBA), along with the presence of ferrite. The number of welding passes and heat input had a significant impact on the α:γ ratio. The content of ferrite in the welded zone is relatively close to the equilibrium ratio of the base metal and did not exhibit significant fluctuations when employing various welding parameters.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.21608/jest.2023.319429
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
