MARATTO

article · IEEE Access

Highly Efficient Isolated Multiport Bidirectional DC/DC Converter for PV Applications

202413 citationsOpen accessSuez University

Abstract

This study proposes a novel isolated multiport bidirectional DC/DC converter (IMBC) that combines soft-switching (SS) and resistor-capacitor-diode (RCD) snubber circuits for battery charge and discharge applications in photovoltaic (PV) power systems. The proposed SS circuit operates at zero-current (ZC) switching (ZCS) when the switches are on to reduce the switching losses. The RCD snubber circuit also suppresses the overvoltage when turning off switches. Combining the two circuits also enables a more comprehensive operating range for SS, resulting in low losses and high efficiency. A thorough study of operating systems and design considerations is shown. PSIM illustrates the effectiveness of the suggested control method. A prototype of the suggested IMBC with an output voltage of 120 V and an output power of 150 W is constructed to confirm the viability and efficiency of the suggested topology. The maximum efficacy of the suggested topology in the step-up mode for the PV arrays is about 96.4% at an input voltage of 20.5 V and output power of 150 W. In comparison, the efficiency is about 98.5% in the step-down mode for charging and discharging the battery which is considered a highly satisfactory performance.

Research topics

  • Advanced DC-DC Converters
  • Multilevel Inverters and Converters
  • Photovoltaic System Optimization Techniques

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.1109/access.2024.3442711

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.