article · Experimental Heat Transfer
This study experimentally investigates the influence of dimple (DHS), flat plate (FHS), and trapezoidal heat spreader (THS) cooling systems on thermal regulation of low concentrated solar cell (LCPV). It is performed at 1.5 and 2 HS/PV area ratio and HS thicknesses 1 and 2 cm under 3100 W/m2 solar irradiance. Results reveal that using DHS outperforms other cooling systems in terms of cell temperature and electric performance. Increasing HS area ratio and thickness significantly enhances PV performance. DHS, PHS, and THS achieve maximum PV temperature reduction of 44.4, 43.2, and 41°C and PV efficiency improvement of 16.89%, 14.87%, and 13.9%, respectively.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.1080/08916152.2024.2356166
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
