MARATTO

article · Scientific Reports

Design of a robust neural network-based controller for frequency stability in microgrids

Abstract

The utilization of renewable energy sources (RESs), including solar and wind, in microgrids (MGs) present a critical challenge for maintaining system stability, mostly because of the elimination of mechanical inertia traditionally provided by synchronous generators. This study presents a controlling technique to guard disturbances in the islanded MG. To address this challenge, a multi-layer feedforward neural network (MLFFNN) is used to enhance the frequency stability of an islanded MG. The MLFFNN controller is compared to traditional controllers such as proportional-integral-derivative-acceleration (PIDA), proportional-integral-derivative (PID) and virtual inertia (VI) to evaluate its performance and effectiveness. Three scenarios are studied: load variations, RES fluctuations, and a combined case including both load variations and RES variability. A comparative study between VI, PID, PIDA, and MLFFNN controllers has been carried out, and shows that the MLFFNN combined with the VI controller is better than VI, PID, PIDA and MLFFNN controllers in all cases. Compared with the uncontrolled system, the MLFFNN with VI reduced the maximum frequency deviation from 4.92 to 3.86×[Formula: see text] Hz in the third case. Finally, the MLFFNN combined with the VI controller provided better performance for frequency stability.

Research topics

  • Frequency Control in Power Systems
  • Microgrid Control and Optimization
  • Wind Turbine Control Systems

Sustainable Development Goals

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.1038/s41598-026-52103-8

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.