article · International Journal of Circuit Theory and Applications
ABSTRACT The transimpedance amplifier (TIA) is an essential component in optical communication systems. It converts the photodiode current to a voltage for further processing. In this paper, a novel CMOS current‐mirror‐based TIA is proposed. Its suitability to optical communication systems is verified. The current‐mirror topology is chosen due to its low input resistance and highly linear current amplification. The proposed TIA employs negative feedback and shunt‐inductive peaking to extend the bandwidth. Three configurations of the shunt‐inductive peaking are explored: one with passive inductors and two with active inductors. The proposed TIA is verified by simulation using the 45‐nm CMOS technology with a 1‐V supply and 1‐pF photodiode capacitance with the key performance trade‐offs discussed. A figure of merit ( FoM ) is introduced to evaluate the performance of the proposed TIA. The simulation results of the proposed TIA with passive inductors show a gain of 30.6 dB, a 3‐dB bandwidth of 2.8 GHz, and a power consumption of 1.63 mW, with an input‐referred noise current of 23.55 pA/√Hz.
This page summarises published work. The authoritative version sits with the publisher.
DOI: 10.1002/cta.4353
Is something wrong with this record? Report it or request removal.
Discussion
Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.
No discussion yet. Open the first thread.
New to MARATTO™? Create a free account.
