MARATTO

article · WSEAS TRANSACTIONS ON POWER SYSTEMS

Design and PIL Implementation of Fuzzy Logic-based MPPT Control for Symmetrical Multilevel Boost Converter

20244 citationsOpen accessUniversité Sultan Moulay Slimane

Abstract

This paper aims to introduce a fuzzy logic adaptive MPPT controller to control a symmetrical multilevel converter in a standalone PV system. The system is evaluated under fixed and variable solar radiation with 15 V as the input voltage 60 V as the required output voltage and 50 kHz as the switching frequency. Results prove that by using the controller, the system successfully tracks the MPPT point for constant and variable radiation without oscillation around the maximum power point. In addition, the overshoot and time response is reduced while the voltage ripples are eliminated. The proposed controller is verified through practical implementation in Arduino mega board to test the accuracy of results. The practical finding via a processor in the loop test validates the simulation results.

Research topics

  • Advanced DC-DC Converters
  • HVDC Systems and Fault Protection
  • Microgrid Control and Optimization

Sustainable Development Goals

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.37394/232016.2024.19.33

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.