MARATTO

article · Water Practice & Technology

Assessment of heavy metal and other chemical pollution in Lake Tana along urban peripheries, Ethiopia

20243 citationsOpen accessBahir Dar University

Abstract

Abstract This study investigates the heavy metals (HMs) and other constituents in Lake Tana around the Gulf of Bahir Dar City. The water sample was collected from areas receiving drainage water and a reference sample was collected from areas away from the urban impact, both during dry and wet seasons. Pollution sources and levels were determined using pollution indices and GIS spatial analyses. All in situ parameters were in the recommended range of the USEPA aquatic and WHO drinking water guidelines. The level of dissolved P was recorded between 0.03 and 0.9 mg/l and the level of N-NO3 ranged from 0.05 to 1.01 mg/l indicating that the limits were above USEPA aquatic criteria. The HMs varied from 0.08 to 2.85 mg/l for Cu, 0.10 to 1.60 mg/l for Fe, 0.04 to 0.22 mg/l for Cr, and Mn was below detection. Cr and Fe were above the aquatic and drinking water guideline limit. Spatially, pollution was more significant in areas receiving drainage. Also, except Cu and Fe, other parameters were higher in the rainy season indicating storm runoff pollution. The overall pollution indices of water quality status, such as water quality index 63, heavy metal pollution index 3.1, and nutrient pollution index 4.7, indicated the quality level of water to be alarming. Therefore, comprehensive regulatory and waste management practices are needed.

Research topics

  • Aquatic Ecosystems and Biodiversity

Sustainable Development Goals

Read the original research

This page summarises published work. The authoritative version sits with the publisher.

DOI: 10.2166/wpt.2024.083

Is something wrong with this record? Report it or request removal.

Discussion

Discuss this research

Have you built on this work, tried to replicate it, or seen it applied in practice? Share what you know. Verified researchers and MARATTO™ domain experts can open a discussion, and any member can reply. Contributions are reviewed before they appear.

No discussion yet. Open the first thread.